Do not let your freezer freeze you out. We’ll assist determine the most likely reasons for the most typical freezer repair service.

Has your frozen food lost its chill? Is your meat so freezer-burnt it’s completely white? Is the freezer groaning and groaning like Old Male Winter Season himself– or even worse, not operating at all? When your freezer isn’t doing its task, it may not be a disaster needing a repair work or full-blown replacement. Prior to employing the professionals for a repair work, you can in some cases do a little sleuthing yourself– equipped with some details from the professionals at Academic Appliance Repair.

RELATED: If your home appliances might use a little TLC, our professionals can assist.
Arrange a appliance repair service consultation now

Here are the leading 5 most typical freezer issues that Academic Appliance Repair’ professionals see over and over once again and the most likely perpetrators behind them.

# 1 ISSUE: My freezer is making odd sounds.

MOST LIKELY PERPETRATOR: The evaporator fan motor requires to be changed. Remember, however, that not all freezers will make precisely the very same noise when this takes place. Sounds originating from the freezer might likewise be brought on by:

  • Clicking noises from the ice maker as it gathers a batch of ice
  • Sizzling noises as the device goes through a defrost cycle
  • Gurgling noises as water drains pipes off the evaporative coil throughout the defrost cycle
  • Swishing or whirring noises as a multiple-speed fan increases to high speed

The essential concern to ask yourself is if there are any other problems happening with the home appliance. Is the ice maker working? Does the freezer preserve your wanted temperature level? Does it give water and ice? If whatever is working, then the sound is most likely simply the device going through its typical operation. Identifying a sound grievance can be extremely challenging. What seem like humming on one day may seem like buzzing on another. Volume is frequently relative; so what is thought about loud at nighttime may be peaceful throughout the day. Likewise, various conditions will trigger the device to sound in a different way. Constantly describe the owner’s handbook for particular information concerning regular operating noises. If the device has another problem besides the weird sound, then solving that concern will more than most likely likewise solve the sound problem.

# 2 ISSUE: There’s frost accumulation in my freezer.

MOST LIKELY PERPETRATOR: The defrost heating system requires to be changed. Depending upon where the frost is forming, it might be due to lots of correctable conditions.

  • Frost forming around the freezer door’s gaskets suggests the door was not totally closed. Try to find any product packaging or products that may avoid the gaskets from sealing correctly: food bundles standing out too far, a drawer that’s not totally sealing, an ice container not locked down or products left on top of the home appliance.
  • The freezer temperature level might be set too low if the frost is light, snowy and appears to be all over. If the set temperature levels of the device are too low, there isn’t an opportunity to get rid of the wetness from the air as the device cools. The wetness will rely on “snow” prior to the device begins the next cooling cycle. Ensure the freezer temperature level is around 0 ° F( -18 ° C )and the fridge is around 37 ° F (3 ° C).
  • The freezer door may have been exposed if the frost is all over and is difficult and icy. In the beginning, the frost will form closer to the door location however will ultimately cover the whole interior. Most of the times, fixing the problem that triggered the frost accumulation and enabling the freezer to go through a number of defrost cycles will clean up the extreme frost, and the home appliance will be back to typical.
  • Frost developing entirely on the back of the freezer area, where the evaporator coil lies, suggests a concern with the defrost cycle. Depending upon the home appliance, this might be either a faulty heating unit, bimetal, thaw sensing unit, thaw timer or control panel. More troubleshooting is required to determine just what is required to solve the problem.

# 3 ISSUE: There’s a percentage of water dripping on the flooring beside my freezer.

MOST LIKELY OFFENDER: The defrost drain has actually frozen over and requires to be thawed and cleaned up. Water on the flooring by the device might likewise be because of:

  • Dropped ice that melted
  • Spilled beverage when filling a glass

If the device has water a connection for water and ice, the leakage might be originating from the family connections. Check the water line going from the shutoff valve to the freezer. Pay attention to where the line connects to the device and to the home valve. The water line need to be changed if it’s dripping anywhere.

Thoroughly examine around the shutoff valve. The valve needs to be changed if it’s dripping anywhere. Contact a certified plumbing to change it if you’re not able to do so yourself.

If the water is originating from the freezer itself, it might be because of the condensation pan overfilling. This will typically be because of:

  • Extreme quantity of frost forming on the evaporative coils. When the freezer goes through a defrost cycle, it’s producing more water than the drain pan can hold. This might be because of high use, specifically throughout times of high humidity. Limitation the variety of times the freezer door is opened along with the length of time the door is exposed.
  • Water isn’t vaporizing in the condensation pan prior to the next defrost cycle. Make certain the back mechanical space cover remains in location. This permits correct air flow over the condensation pan, which will enhance the rate at which the water is vaporized. This cover will require to be changed if harmed or missing out on.

The condensation pan will require to be fixed or changed if it’s split and dripping.

$0 Diagnostic Fee with repair

We do not charge service fee with completed repair, only the cost of labor and parts

Make an Appointment

Book Online

We charge by the job

NOT BY THE HOURWe are focused, efficient and we get the job done!

Make an Appointment

Book Online

10% Off SPECIAL OFFER

Leave us Google Review and Receive 10% off your next appointment

Make an Appointment

Book Online

# 4 ISSUE: My freezer will not run.

MOST LIKELY PERPETRATOR: The electronic controls require to be changed– however very first check if the power light indication and freezer light are working. If not, power may not be streaming to the item. Validate the device controls are set correctly:

  • More recent devices have a display room or demonstration mode utilized on the sales flooring to highlight functions without running the cooling system. The majority of the time, the guidelines on how to put the home appliance into and out of demonstration mode will be noted in the owner’s handbook in the “Setting the Device’s Controls” area.
  • The other setting to examine is that the freezer was set to off or power off. Ensure the home appliance controls are set to 0 ° F( -18 ° C ) for the freezer and 37 ° F( 3 ° C) for the fridge. Mechanical controls ought to be set to the midpoint settings. Describe the owner’s handbook for particular directions on changing the home appliance’s set temperature level.

Make certain the home appliance has power going to it. This can be done by validating interior lighting or inspecting if the interface display screen is on or if the home appliance can give water or ice. If there’s no power going to the device, check to see if the outlet is great by plugging in something else, like a hairdryer or light. If that gadget likewise does not work, then the outlet does not have power going to it. Try to find a tripped breaker or tripped GFI outlet. A certified electrical expert ought to be called for more major electrical issues.

If there’s power going to the outlet, there might be a problem with the primary control or interface boards, or the temperature-monitoring gadgets such as the sensing units, or the thermostat may be bad. More troubleshooting will be required to determine and deal with the problem.

# 5 ISSUE: The temperature level is too warm.

MOST LIKELY PERPETRATOR: The defrost thermostat requires to be changed if its contacts aren’t effectively operating. The regular freezer temperature level is in between 0ºF and 5ºF. Here are some things to look for if the freezer is running too warm, however the fridge area is preserving the preferred temperature level:

  • The freezer’s set temperature level is right. Ensure it wasn’t mistakenly gotten used to a warmer-than-desired temperature level. If it was, set the temperature level back to the advised setting of 0 ° F( -18 ° C).
  • Guarantee there suffices quantity of item in the freezer area. It’s suggested to keep the freezer 70% to 85% complete. Excessive things in there will restrict air flow within the device – and insufficient will trigger all the cold air to spill out of the device whenever it’s opened.
  • The positioning of items within the device is likewise essential. Keep things uniformly distributed near the middle of the racks so as not to obstruct any vents or disrupt appropriate air blood circulation.
  • Inspect that the device is kept in an environment in between 55 ° F (13 ° C) and 110 ° F (43 ° C). If the environment is too cold, the freezer might not get adequate run time to keep its temperature level. If the temperature level is too warm, the home appliance will have a tough time getting the interior to the preferred temperature level.

If none of the above circumstances seems triggering the problem:

  • There might be a defrost concern if the back of the freezer, where the evaporator coil lies, is greatly frosted. Depending upon the device, this might be brought on by a faulty defrost heating system, bimetal, thaw sensing unit or control panel.
  • The temperature-monitoring gadget might be malfunctioning, either a temperature level sensing unit or thermostat isn’t checking out the temperature level properly.
  • The primary control panel may not read the temperature level control input properly.
  • The sealed system might be dripping, and there’s not adequate freon to cool the freezer to the preferred temperature level.

Any of the above scenarios will need more troubleshooting to determine and deal with the problem.